Deep Pour Epoxy Resin by POURLA, 3 Gallon Kit for 2–4 Inch River Tables and Casting Projects

Deep pour epoxy resin fills thick river-table sections, casting molds, and cracks in wood while its low-viscosity consistency helps trapped air escape. POURLA's clear formula supports single pours from 2 to 4 inches thick and provides up to 6 hours of working time at 75°F.

The 3 gallon kit contains 2 gallons of Part A epoxy resin and 1 gallon of Part B hardener for a 2:1 volume ratio. It is formulated with UV inhibitors and antioxidants and can also be used for floral preservation, custom tabletops, and projects involving compatible surfaces such as wood, glass, stone, concrete, and prepared metals.

Why It Stands Out

• Make 2–4 inch single pours for substantial river-table sections, thick floral preservations, large molds, and custom tabletops.
• Low viscosity helps the mixed resin flow into cracks and crevices while allowing trapped air to escape during the slow cure.
• The clear formula is designed to produce a glass-like, high-gloss finish in casting and woodworking projects.
• Pre-measured 2 gallons of Part A and 1 gallon of Part B create the specified 2:1 mixing ratio by volume.
• Up to 6 hours of working time at 75°F provides time to fill molds, incorporate color pigments, and address detailed areas.
• UV inhibitors and antioxidants are incorporated into the formula to help resist yellowing and oxidation.

Specifications

• Brand: POURLA
• Capacity: 3 gallons total
• Components: 2 gallons epoxy resin (Part A) and 1 gallon hardener (Part B)
• Color: Clear epoxy resin and clear hardener
• Mix ratio by volume: 2A:1B
• Single-pour depth: 2–4 inches; technical maximum up to 4 inches
• Maximum working time: 6 hours at 75°F
• Cure time: 70–100 hours at 75°F, depending on pour thickness
• Recommended working temperature: 50–158°F
• Epoxy resin density: 65.5 ± 1.9 lb/ft3
• Epoxy hardener density: 61.2 ± 1.2 lb/ft3
• Compatible substrates: Carbon fiber, fiberglass, epoxy, wood, prepared metals, masonry, concrete, glass, and stone
• Mixing guidance: Measure Parts A and B accurately, stir thoroughly along the container's inner wall until evenly mixed, then let the mixture sit for 3–5 minutes before use